Siemens HIPATH 1190 - Manual (Page 93)

Miscellaneous Functions
93
Step by step
Using the HiPath 1100 Manager application 1
Required:
• Analog line: The system’s serial port as well as the
remote PC must be connected to a modem with ac-
cess to the telephone network.
• Digital line: The S
0
Option Module must be connect-
ed to a ISDN-type digital line, and the remote PC
must have an ISDN modem installed and connect-
ed.
Press this key.
> : Select and press to confirm.
> :
or
At the programming extension enter the code for en-
abling remote configuration/updating.
The system will be available for remote configuration via
the application for a specified time period.
Fax Received
If the system has a Fax/DID Module and a fax machine,
you can program a key to indicate when a fax was re-
ceived.
Required: Fax/DID Module installed and configured.
:
Press to confirm.
or
Press the "FAX RECD" key.
[1] The system must be enabled during a conversation by configuring
certain parameters (see General Programming - Remote Configu-
ration in the Programming Manual). For more information on how
to use the HiPath 1100 Manager application refer to the instruc-
tions in the Help file.
Service Menu
MORE FEATURES?
*992= REMOTE ADMINISTRA-
* 9 9 2
Fax CALL ?
FAX RECD
oi.book Seite 93 Mittwoch, 16. August 2006 8:41 08