Transfer, Step by step – Siemens HIPATH 1190 User Manual

Page 45

Advertising
background image

Features used during Call

45

Step by step

Transfer

1

The Transfer feature allows an extension to transfer a

call (incoming or outgoing) to another extension or to an

external number.

Required: A call is in progress.

>

:

Select and press to confirm.

Enter the extension or external number.

Optional (

) Let the caller know that there is a second call.

:

Press to confirm.

or

Replace the handset.

or

Press this key. The LED turns off.

External-to-External over an external analog line

2

When there is an external call in progress, an extension

can make a consultation to another external number

and transfer the call, as described above.

Once the call is transferred and answered at the desti-

nation, a disconnect timer is activated (default is 5 min-

utes). A 20-second warning tone is sent to both parties

before the call is disconnected. In order to continue the

call without disconnecting, the destination number

must enter a code (MF, default "00") to restart the time-

out., The call disconnect timeout and the Code to reset

it are configurable. Please ask your System Support

Technician for more information.

[1] If a transfer’s destination extension does not answer, the call is re-

turned to the calling extension.

An External-to-External transfer can only be made when at least
one of the calls is an outgoing call.

A call cannot be transferred to an Entrance Telephone, neither can
an Entrance Telephone transfer a call.

A call can only be transferred to a busy extension if "Transfer when
Extension is Busy" feature is enabled (see Programming Manual -
Programming an Extension - Transfer when Extension is Busy). In
addition, this can only be carried out within the limitations specific
for "Urgent Call/Callback when Busy".

TRANSFER ?

TRANSFER ?

Speaker

[2] A call is terminated under three conditions:

• Disconnect timeout after and external-to-external transfer (Code
183)

• When a busy signal is detected

• Type of Answering Signal (Code 158) detected.

oi.book Seite 45 Mittwoch, 16. August 2006 8:41 08

Advertising