Siemens HIPATH 1190 - Manual (Page 34)

Step by step
Functions used for making calls
34
Recall Verification/Deactivation
> :
Select and confirm.
or
Enter the code for canceling a recall.
Delete selected record.
: Press to confirm.
End consultation
> : Select and press to confirm.
or
Press this key. The LED turns off.
or
Press this key. The LED turns off.
Override
1
The Override feature allows the user to override a con-
versation. A beep signals that the conversation in
progress has been overridden.
Required: There is a conversation in progress at the call
destination.
> : Select and press to confirm.
or
Enter the code for confirming the override.
or
Press the "OVERRIDE" key.
The called party and the caller hear a warning signal ev-
ery two seconds. If the called party is using a system
telephone with a display, it will show: "OVERRIDE:
(name or telephone number) and "RELEASE CALL?"
Initiate conversation.
RECALL VERIFY/DEACTI-
8 # 5
DELETE?
EXIT?
Speaker
Service Menu
[1] The user must have authorization from the system’s Support Tech-
nician in order to use this feature Programming Manual, Program-
ming an Extension - Override).
OVERRIDE?
6 2 *
OVERRIDE
(Alert)
oi.book Seite 34 Mittwoch, 16. August 2006 8:41 08