Siemens HIPATH 1190 - Manual (Page 29)

Functions used for making calls
29
Step by step
Caller Lists
1
If so configured, the last calls not answered identified
by the extension are stored in three caller lists. These
caller lists can be programmed to save only external
calls or both external and internal calls. Using a System
Telephone with a display you can view and select lists:
• 1 = CALLS NOT ANSWERED 2
• 2 = CALLS ANSWERED
• 3 = CALLS MADE
Up to 10 calls can be stored for each caller list. They are
stored in the order they were received or made. Each
call is stored with a time stamp. The list starts with the
most recent call that has not been recalled. If several
calls were from the same caller, the list will show the
time of the last call and the total number of times the
call was received.
Looking Up a Caller List
> : Select and press to confirm.
or
Enter the dialing code for looking up Caller Lists.
: Select and enter to select the type of Caller List want-
ed.
or
> :
or
> :
or
Enter the number of the list you want to look up:
= Calls not answered
= Calls answered
= Calls dialed
: Enter to display additional lists.
[1]Make sure that Caller ID is enabled by your carrier.
[2] When the Do Not Disturb facility for an extension is activated, un-
answered calls are not stored in the memory.
CALLER LIST?
8 2 #
1=CALLS NOT ANSWERED
2=CALLS ANSWERED
3=CALLS DIALED
1
2
3
NEXT?
oi.book Seite 29 Mittwoch, 16. August 2006 8:41 08