Seiko Instruments LTP F Series User Manual
Page 14
Advertising
1-4
Printing and paper feeding precautions
z
Make sure that variation in the motor drive frequency does not lead to noise or a loss of
paper feed force before making designs.
z
Design the outer case to prevent the paper feed out from being caught in the platen.
z
When or after printing or paper feed has been suspended, if data is input or printing
restarts, paper feed may not be performed properly for several dot lines just after printing
starts. This problem is more likely to occur when printing bit images.
z
Do not open the platen unit while printing. The printer may be damaged.
z
Do not use label paper, carbon paper, and thermal paper of more than 80
µm.
z
Do not perform back feed (backspin of the motor).
Advertising