Seiko Instruments LTP F Series User Manual
Page 3
iii
PREFACE
This reference manual describes the specifications and basic operating procedures for the LTP F Series
Thermal Printer Mechanism (hereinafter referred to as “printer”).
The LTP F series has the following two types of printers that are classified by their paper width.
LTPF247A-C432
LTPF347A-C576
This manual usually describes information common to any printer, and each information with the name if
information is different.
Chapter 1 “Precautions” describes safety, design and operational precautions. Read it thoroughly
before designing so that you are able to use the product properly.
SII has not investigated the intellectual property rights of the sample circuits included in this manual.
Fully investigate the intellectual property rights of these circuits before using. In particular, SII reserves
the industrial property rights for the Heat Storage Simulation described in Chapter 3. Using it for the other
printer is infringement on the industrial property rights.