B&G H1000 Autopilot - Manual (Page 48)

h1000 pilot
optional devices
Page 47
man overboard button (mob)
description
The man overboard (MOB) button is a large, red, weatherproof press-switch supplied with 15m (45ft) of
two-core screened cable. Operation of this button will start the MOB sequence of operations, if fitted,
an audible alarm will sound when the button is pressed.
siting the man overboard alarm button
•
Select a suitable bulkhead, easily accessible to all crew in an emergency.
mounting procedure
•
With a 32mm (1¼") hole-cutter, cut a clearance hole for the button body.
•
Remove the nut and washer, then carefully feed the cable through the hole ensuring that the
sealing gasket is in place to prevent moisture ingress.
•
From behind the bulkhead, feed the washer and nut over the cable and tighten the nut onto the
switch body.