Sony STR-DN1000 - Manual (Page 16)

16 US
a)
See the table on page 116 for information on the
buttons that you can use to control each
component.
b)
The number 5/SAT, TV CH +/PRESET + and N
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Name Function
PRESET
+
b)
/–
a)
Press to
– select preset stations.
– select preset channels of the
VCR, satellite tuner,
Blu-ray disc player, DVD
player, LD player, DVD/
VHS COMBO, or DVD/
HDD COMBO.
O F1 a)
, F2
a)
Press BD or DVD (E), then
press F1 or F2 to select a
component.
• DVD/HDD COMBO
F1: HDD
F2: DVD disc, Blu-ray disc
• DVD/VHS COMBO
F1: DVD disc, Blu-ray disc
F2: VHS
P BD/DVD TOP
MENU
a)
Press to display the menu or
on-screen guide of the DVD
player, Blu-ray disc player,
PSX or DVD/VHS COMBO
on the TV screen. Then, use
V/v/B/b (J) and
(J) to
perform menu operations.
BD/DVD
MENU
a)
Press to display the menu of
the DVD player or Blu-ray
disc player on the TV screen.
Then, use
V/v/B/b (J) and
(J) to perform menu
operations.
TV INPUT
a)
Press TV (D) and then press
TV INPUT to select the input
signal (TV input or video
input).
WIDE
a)
Press TV (D) and then press
WIDE repeatedly to select the
wide picture mode.
Q MUTING a)
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
To mute the sound of the TV,
press TV (D) and then press
MUTING.
R TV VOL +/– a)
Press TV (D) and then press
TV VOL +/– to adjust the TV
volume level.
MASTER
VOL +/–
a)
Press to adjust the volume
level of all speakers at the
same time.
S DISC SKIP a)
Press to skip disc when using
a multi-disc changer.
Name Function
T RETURN/
EXIT O
a)
Press to
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, DVD
player, etc. is displayed on
the TV screen.
To return to the previous
menu of Sony TV, press TV
(D) and then press
RETURN/EXIT O.
U DISPLAY a)
Press to display the current
status of or information on
components connected to the
receiver.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
V RESOLUTION Press repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack
(page 79).
W INPUT MODE Press to select the input mode
when the same components
are connected to both digital
and analog jacks (page 108).
X SHIFT
Press to light up the button. It
changes the remote button
function to activate the
buttons with pink printing.
Y THEATER
Press to turn the Theater mode
on and off when connecting
the receiver to products
featuring “BRAVIA” Sync.
Z RM SET UP
Press to set up the remote.