Sony STR-DN1000 - Manual (Page 77)

77 US
A
m
p
lif
ie
r O
p
e
ra
tio
n
s
Settings for the surround
sound
(Surround Settings menu)
You can adjust the sound effect on the
“S.F. Select” screen.
Note
The setup items you can adjust on each menu vary
depending on the sound field.
x S.F. Select (Sound field select)
You can select the surround sound field and
adjust the effect level on the “S.F. Select”
screen.
For details on the sound field, see “Enjoying
Surround Sound” (page 63).
To select the surround sound
field
1 Press V/v repeatedly to select
“S.F. Select”, then press .
2 Press V/v repeatedly to select
surround sound you want, then press
.
To adjust the effect level
1 Press V/v repeatedly to select
“S.F. Select”, then press or b.
2 Press V/v repeatedly to select
surround sound you want, then press
.
Note
Effect Level adjustment is valid only when
“Cinema Studio EX DCS ” is selected.
3 Press V/v repeatedly to select “Effect
Level”, then press or b.
4 Press V/v repeatedly to select effect
level you want, then press .
• 50%
• 80%
• 100%
• 150%
x E.Sur Mode (Enhanced surround
mode)
You can select the decoding mode for the
sound field.
For details on the decoding modes available,
see “Setting a multi channel surround sound
effect” (page 65).
• Pro Logic II
Performs Dolby Pro Logic II decoding. A
source recorded in 2 channel format is
decoded into 5.1 channels.
• Pro Logic IIx
Performs Dolby Pro Logic IIx decoding. A
source recorded in 2 channel or 5.1 channel
format is decoded into 7.1 channels.
• Neo:6 Cinema
Performs DTS Neo:6 Cinema mode
decoding. A source recorded in 2 channel
format is decoded into 7 channels.
• Neo:6 Music
Performs DTS Neo:6 Music mode decoding.
A source recorded in 2 channel format is
decoded into 7 channels. This setting is ideal
for normal stereo sources such as CDs.
• Neural-THX
Next generation of Neural-THX
®
Surround.
In addition to stereo enhancement
processing and pure discrete 5.1 surround
sound, now capable of full 360° 7.1 surround
sound playback from Neural-THX
®
surround encoded content.
Note
You can select “Pro Logic II” when there is no
surround back speaker on the “SP Pattern” menu, or
you can select “Pro Logic IIx” when there is a
surround back speaker. You cannot select both
settings at the same time.
Surround Settings menu
parameters