Sony STR-DN1000 - Manual (Page 87)

87 US
A
m
p
lif
ie
r O
p
e
ra
tio
n
s
a)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, SW).
b)
Depends on the speaker pattern setting, some parameters or settings may not be available.
c)
You can only select this parameter if “SP PATTERN” is not set to a setting with surround back speakers (page
73).
d)
You can only select this parameter if your speaker is set to “SMALL”.
e)
You can only select this parameter if you select Cinema Studio A/B/C as sound field.
f)
This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the
receiver.
g)
This parameter is only available when HDMI input signals are detected.
h)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
Video settings
[<VIDEO>]
Resolution
[RESOLUTION]
DIRECT, AUTO, 480/576i,
480/576p, 720p, 1080i
AUTO
Video input assignment
[V. ASSIGN]
VIDEO 1 ? c COMPONENT1, COMPONENT2,
COMPONENT3, COMPOSITE,
HDMI1, HDMI2, HDMI3, HDMI4,
NONE
VIDEO 2 ? c
BD ? c
DVD ? c
SAT ? c
SA-CD/CD ? c
Switching component signals
[COMP. DEC.]
DEC. ON, DEC. OFF DEC. OFF
HDMI settings
[<HDMI>]
Control for HDMI
[CTRL:HDMI]
CTRL ON, CTRL OFF CTRL OFF
Setting HDMI audio input
[AUDIO OUT]
AMP, TV+AMP AMP
Subwoofer level for HDMI
g)
[SW LEVEL]
SW AUTO, SW +10 dB, SW 0 dB SW AUTO
System settings
[<SYSTEM>]
Naming inputs
[NAME IN]
For details, see “Naming the input
(Name Input)” (page 49).
Brightness of the display
[DIMMER]
0% DOWN, 40% DOWN,
70% DOWN
0% DOWN
S-AIR settings
[<S-AIR>]
S-AIR ID
h)
[S-AIR ID]
ID: A, ID: B, ID: C ID: A
Pairing
h)
[PAIRING]
START, CONDITION START
S-AIR mode
h)
[S-AIR MODE]
PARTY, SEPARATE PARTY
RF Change
h)
[RF CHANGE]
RF AUTO, RF ON, RF OFF RF AUTO
S-AIR Standby
h)
[S-AIR STBY]
STBY ON, STBY OFF STBY OFF