Sony STR-DN1000 - Manual (Page 37)

37 US
Ge
tt
ing St
ar
te
d
Insert two R6 (size-AA) batteries in the
RM-AAP040 remote commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the programmed
remote codes may be cleared. If this happens,
program the remote codes again (page 117).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.
7: Displaying the GUI
menu on the TV screen
You can select the functions or change the
settings of the receiver by using the GUI menu
on the TV screen. Follow the procedure below
to make the settings so that the GUI menu
appears on the TV screen.
Note
GUI menu does not appear on the TV screen when
you have connected your TV to the MONITOR
VIDEO OUT jack.
Tip
See “Operating without connecting to a TV” (page
82) if you want to operate the receiver without
connecting to a TV.
1
Connect a TV to this receiver.
See “3: Connecting the TV” (page 21).
2
Turn on the TV.
3
Press ?/1 to turn on the
receiver.
Inserting batteries into the
remote
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
THEATER
SYSTEM STANDBY
RM SET UP
?/1
CLEAR/>10
SHIFT
RESOLUTION
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI 3 HDMI 2 HDMI 1
HDMI 4
SA-CD/
CD
DMPORT TUNER
MENU
AV ?/1
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
DVD
INPUT
MODE
SLEEP
NIGHT
MODE
TV AMP
?/1
GUI MODE
MENU
continued