Samsung DVD-V2500 - Manual (Page 16)

31
TV Aspect Ratio
30
Set the aspect ratio (length x width) of your TV screen so the DVD
player will display movies at the appropriate size for your
television. Choose from standard, letterbox, or widescreen format.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTERto select.
3 Set “TV Aspect”
Move the selection bar to “TV Aspect”, then press the left or right
button to select from the following options:
• Letterbox – This method displays the full width of the
widescreen movie on a standard 4:3 television.
As a result, black bars will appear at the top and
bottom of the screen.
• Pan-Scan – The familiar way of watching DVD and VHS
movies, this method selectively crops (by panning
and scanning to keep the most important part of the
picture visible) wide screen movies to fit a standard
4:3 television screen.
• Widescreen – This method allows you to view the full 16:9 picture
on a widescreen television.
2X Scan Audio
When you play DVD Disc at 2x play made you can turn Audio
on or off.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTERto select.
3 Set “2x Scan Audio”
Move the selection bar to “2x Scan Audio,” then press right or left
button to select from the following options:
• Off - Turns 2x audio off.
Though 2x Scan Audio is ON in the SETUP MENU, no
sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
• On - Turns 2x audio on.
W i d e
L e t t e r b o x
P a n - S c a n
Off
On
00006A DVD-V2500/XAC-Eng2 11/12/02 7:05 PM Page 30