Samsung SVR-470 - Manual (Page 17)

2.4. Remote Controller Buttons
[How to Use]
③ To control a product with ID 1, press the ID SET button [Pic 1] and then the number 1. The
product displays ID=1 on the screen [Pic 2] and starts responding to the remote controller's
commands.
④ To control a product with ID 2, follow the same instructions as above; press ID SET, and then the
number 2. The product then displays ID=2 on the screen and starts responding to the remote
controller's commands.
[Pic 1. Remote ID SET Button] [Pic 2. The product displays the ID on the screen.]
16