Ddns connection setup, Ddns – Samsung SVR-470 User Manual
Page 37
6.2. DDNS Connection Setup
6.2. DDNS Connection Setup
Step 1). Set up the DDNS connection as follows at the Network Settings menu in the SVR‐470 main
frame.
Press the Menu button, and then select the Network menu. The following screen appears.
On the following screen, change DDNS to "ON," and then press "ENTER"
① SERVER ADDRESS: Enter the address of the DDNS server.
② The default server is
() Caution: Do not change the server name unless it is necessary.)
③ ID: Enter the Domain registered at www.samsungipolis.com.
④ PW: Enter the password registered at .
Once you finish the settings above, the DVR main frame is ready to connect to the DDNS
server.
Step 2). Once you finish the settings above, move to the registered DDNS server. (Refer to
6.3. DDNS
If the DVR is connected to a cable modem or an xDSL modem, a new IP address will be assigned each
time the device connects to the ISP. In such a case, the user may not be able to find out the DVR's IP
address. By registering a DVR with a dynamic IP address to a DDNS server, the DVR's IP may be
identified by connecting to the DDNS server.
To register a dynamic IP address to a DDNS, follow the instructions shown below.
36