Samsung SVR-470 - Manual (Page 9)

1.1. Warning Symbols
™ Disassembly and Cleaning
9 There is a risk of malfunction, shock, and other dangers. Do not disassemble or
attempt to fix or alter the product yourself.
9 Do not clean the product with water, paint thinner, or other organic solvent as doing
so may cause product malfunctions and/or electric shock. When cleaning the product,
use a dry cloth to wipe the exterior of the device.
Caution
Misuse or wrongful operation of the item may result in injury or damage to the item.
It indicates caution should be observed when operating.
™
Installing the Product
9 When installing the product, please leave at least 15cm of space between the cooling
vent and the wall for proper heat dissipation.
9 To prevent user injury and product damage, please install the product on a level
surface with no risk of the product falling.
9 Avoid installation in an environment where the product will be exposed to heat or
direct sunlight; product deformation and/or damage may result.
9 Installing a camera while recording is in progress may corrupt the recorded picture in
other channel(s). To avoid decreasing video quality, please only record after
installation of a new camera is complete.
™ Using the Product
9 Avoid shock and vibration while operating or moving the item.
9 Do not move the product while it is in operation; do not expose the product to strong
impact or throw the product.
9 Before adding HDDs from a third party, please contact your sales agent and avoid a
possible malfunction.
9 Damage to the product that is consequential to using a non-recommended hard disk
voids your product warranty.
9 This product is not an anti-theft or fire-prevention device; the manufacturer is not
responsible for any damage to property or personnel that may occur.
9 We recommend the installation of an uninterrupted power supply for all storage
devices.
8