Samsung SVR-470 - Manual (Page 25)

3.3. Installing HDD
[HDD Connection Diagram]
€ HDD Connecting Instructions
① Place an HDD attached with the HDD brackets to the product hanger.
② Attach the HDD to the hanger using the enclosed fixture screws.
③ Connect the enclosed power/data cable to the HDD.
④ Connect the HDD data cable to the main board.
⑤ Connect the HDD power cable to the main board.
Note
The product automatically formats a newly installed HDD when it powers up; you can
immediately start using new HDDs without formatting.
€ Detaching HDD
Detaching an HDD is the same as attaching it, but in reverse order.
① Detach the HDD from the product hanger.
② Unplug the SATA and power cables.
③ Loosen the HDD fixture bracket.
④ Detach the HDD.
Caution
When attaching or detaching an HDD, make sure the product turned off first.
24