Samsung SVR-470 User Manual
Page 24
Advertising
3.3. Installing HDD
Once the HDD is installed, connect the SATA and power cables.
As shown in the picture below, connect the enclosed SATA cable to the HDD, followed by the HDD
power then data cables to the board.
[Connecting SATA Cable]
[Connecting Power & Data Cables]
① HDD Data Cable Connector on the Board
② HDD Power Cable Connector on the Board
After installing the HDD, fasten the HDD brackets as shown in the picture below.
Now the HDD is fully attached to the product.
23
Advertising