Sharp Aquos LC-37D90U - Manual (Page 37)

36
Model
Input
PWR
STOP
STOP 05
00:01:32
Type
i.LINK 1/1 [Thu] 1:33AM
Cancel Connection
Manufacturer
Which model do you use?
Model
Model
Input
PWR
STOP
STOP 05
00:01:32
Model
Input
PWR
STOP
STOP 05
00:01:32
Type
i.LINK 1/1 [Thu] 1:33AM
Cancel Connection
Manufacturer
Which model do you use?
Model
Type
i.LINK 1/1 [Thu] 1:33AM
Cancel Connection
Manufacturer
Which model do you use?
Model
Selecting an i.LINK device
In order to control an i.LINK device from the TV, you
must fi rst choose the i.LINK device to be controlled.
One i.LINK device can be chosen from up to 16 i.LINK
connected decks.
All i.LINK devices connected with i.LINK cables should
automatically appear in the selection screen.
Press i.LINK to display the i.LINK control
panel.
Press a/b/c/d to select “Model”, and
then press ENTER.
• Selection screen appears.
Press a/b to select the device, and then
press ENTER.
• The control panel for the i.LINK device appears.
Using external equipment
1
2
3
• When there is no i.LINK device connected, the message
“No i.LINK model is available” appears. In this case, please
connect an i.LINK device. (See page 33.)
• When there is no i.LINK device selected, the selection
screen appears. In this case, please go to step 3.
NOTE
• Devices that cannot be used with this TV will not appear in
the selection screen.
• Depending on the i.LINK devices connected, the
manufacturer's name and model name of some devices
may not display correctly.
• In the case where the manufacturer's and model names
are not correctly displayed, disconnect the i.LINK cable.
Follow the procedure for “Deleting registered i.LINK device”
and cancel all i.LINK devices you have registered before
reconnecting the i.LINK cable.
• When an item in the selection screen is grayed out, the
item is not recognized by the TV and cannot be selected.
(The item may not be connected properly.)
Disabling the TV's operation of an i.LINK
device
By disabling the TV's operation of an i.LINK device, the
device can be operated from another i.LINK device.
Press i.LINK to display the i.LINK control
panel.
Press a/b/c/d to select “Model”, and
then press ENTER.
• Selection screen appears.
Press b to select “Cancel connection”, and
then press ENTER.
• Operation of the i.LINK device from the TV is
disabled.
1
2
3
• When there is no i.LINK device connected, the message
“No i.LINK model is available” appears. In this case, please
connect an i.LINK device. (See page 33.)
• When there is no i.LINK device selected, the selection
screen appears. In this case, please go to step 3.
Deleting registered i.LINK device
Registered i.LINK devices can be deleted from a list.
If an i.LINK device is connected, it cannot be deleted
from the list.
Press i.LINK to display the i.LINK control
panel.
Press a/b/c/d to select “Model”, and
then press ENTER.
Press b to select a device to be deleted, and
then press ENTER.
1
2
3
Press c to select “Delete”, and then press
ENTER .
• The selected i.LINK device is deleted from the
list.
• Select “Cancel” if you do not want to delete any
device.
4