Sharp Aquos LC-37D90U - Manual (Page 48)

47
Input Select
Selecting input source
Use this menu to select the input source.
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a/b.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Press a/b to select the signal type you
want to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any color.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 terminals.
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
NOTE
• If you set INPUT 1 to Auto, the TV will automatically select
the input signal.
• Check the operation manual of the external equipment for
the signal type.
• Setting INPUT 1 signal selection to “Auto” when other
equipment is connected will result in the following
connection priority.
1
2
1
2
4
3
INPUT 1
1. COMPONENT VIDEO
2. VIDEO
Press MENU to exit.
5
MENU [Option ... Input Select]
Option
Input Select
Output Select
Audio Only
Digital Noise Reduction
Quick Shoot
[Fixed]
[Off]
[DIGITAL]
[Off]
MENU [Option ... Input Select]
AUTO
DIGITAL
ANALOG
DVI input signal setting
Useful adjustment settings
Press a/b to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
Press MENU and the MENU screen displays.
2
3
1
Press INPUT to select INPUT 5.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5 INPUT5
i.LINK
4
5
Press MENU to exit.
6