Sharp Aquos LC-37D90U - Manual (Page 50)

49
View Mode
Side Bar
S. Stretch
Zoom
Stretch
Useful adjustment settings
Press VIEW MODE or a/b while the View
Mode menu is still on the screen.
• You can sequentially select a View Mode that
has its own aspect ratio.
View Mode for 4:3 Programs
Stretch:
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
Press VIEW MODE.
• The View Mode menu displays.
• The menu lists the View Mode options
selectable for the type of video signal currently
being received.
Side Bar:
Suitable for viewing conventional 4:3
programs in their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs
to fi ll the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
1
2
View Mode for HD Programs
The following modes are available for HD programs.
Stretch:
Suitable for viewing wide-screen 1.78:1 aspect ratio program,
stretch mode will still show very thin black bands at the top
and bottom of the screen.
Dot by Dot (1080i/p only):
Detects the resolution of the signal and displays an image
with the same number of pixels on the screen. When a 720p
signal is being input, the image will be delivered in full screen.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs to fi ll the screen.
Zoom:
Suitable for viewing wide-screen 2.35:1 aspect-ratio
programs in full screen.
NOTE
• When using Dot by Dot, it is possible to see noise or
bars around different outer portions of the screen. Please
change view mode to correct this.