Sony CMT-CP505MD - Manual (Page 16)

16 GB
CMT-CP505MD 4-241-515-11(1) GB
Playing only the tracks in
the desired group
This function allows you to listen only to your
favorite tracks which you have registered into a
group. For details of the Group Function, see
page 18.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press GROUP ON/OFF in stop mode
repeatedly until GROUP indicator lights
up.
3
Press GROUP SKIP repeatedly until the
desired group appears.
4
To start playing from a specific track in
the group, turn l/L clockwise or
counterclockwise (or press . or >
on the remote repeatedly) until the
desired track appears.
Proceed to step 5 when you start playing
from the first track in the group.
5
Press MD NX (or N on the remote).
Play starts.
When the playing of the last track in the
group finishes, the MD deck stops
automatically.
Tip
You can perform the operations on pages 13–15 only
for the tracks in the group.
To select the desired play mode, select the play mode
before step 3.
Note
If you select a group that does not have any tracks
registered and press MD NX (or N on the
remote), playback starts from the first track of the
first group on the MD.
Before you start recording
MDs (MiniDisc) let you digitally record and
play music with high quality sound. Another
feature of MDs is track marking. The track
marking feature lets you quickly locate a
specific point or easily edit the recorded tracks.
However, depending on the source you record,
the recording method and the way the track
numbers are recorded differ.
When the source you record from is:
• This system’s CD player
– The MD deck performs digital recording.* 1
– Track numbers are automatically marked as
on the original CD. However, track numbers
are not marked depending on the track (page
63).
• Other digital components
connected to the DIGITAL
OPTICAL IN jack
– The MD deck performs digital recording.* 1
– Track numbers are marked differently
depending on the source you record.
• This system’s tuner or other
analog components connected to
the ANALOG IN jacks
– The MD deck performs analog recording.* 2
– A track number is marked at the beginning
of a recording only, but when you turn on the
Level Synchro Recording Function (page
24), track numbers are automatically marked
in sync with the level of the input signal.
MD – Recording