Specifications – Sony CMT-CP505MD User Manual

Page 64

Advertising
background image

64

GB

CMT-CP505MD 4-241-515-11(1) GB

Guide to the Serial Copy

Management System

Digital audio components, such as CDs, MDs, and
DATs let you copy music easily with high quality by
processing music as a digital signal.
To protect the copyrighted music programs, this
system uses the Serial Copy Management System that
allows you to make only a single copy of a digitally
recorded source through digital-to-digital
connections.
You can make only a first generation copy*
through a digital-to-digital connection.
For example:
1 You can make a copy of a commercially

available digital sound programme (for
example, a CD or MD), but you cannot make a
second copy from the first-generation copy.

2 You can make a copy of a digital signal from a

digitally recorded analogue sound programme
(for example, an analogue record or a music
cassette tape) or from a digital satellite
broadcast programme, but you cannot make a
second copy.

* A first-generation copy means a digital recording of

a digital signal made on digital audio equipment.
For example, if you record from this system’s CD
player to the MD deck, you make a first-generation
copy.

Specifications

Main Unit (HCD-CP505)

Amplifier section
European model:
DIN power output (rated): 30 + 30 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference):

35 + 35 W
(6 ohms at 1 kHz, 10%
THD)

Music power output (reference):

70 + 70 W

Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated): 25 + 25 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference):

30 + 30 W
(6 ohms at 1 kHz, 10%
THD)

The following measured at 220 V AC, 60 Hz
DIN power output (rated): 22 + 22 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference):

28 + 28 W
(6 ohms at 1 kHz, 10%
THD)

Inputs
ANALOG IN:

Sensitivity 250 mV,

(phono jacks)

impedance 47 kilohms

DIGITAL OPTICAL IN (supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)

Outputs
PHONES:

Accepts headphones with
an impedance of 8 ohms
or more

SPEAKER:

accepts impedance of 6 to
16 ohms.

CD player section
System

Compact disc and digital
audio system

Laser

Semiconductor laser
(

λ=780 nm)

Emission duration:
continuous

Frequency response

2 Hz – 20 kHz

System limitations of MDs
(continued)

Advertising