Silvercrest KH 2377 - Manual (Page 20)

18
Handling and operation
KH 2377
GB
IE
Bass/Treble/Balance/Fader
Press the ‹ SEL button on the remote control or the multi controller on the
device. The current volume level is shown. Each additional press of the SEL
button or the multi controller accesses the next setting point.
The following settings are possible:
VOL - Volume (from 0 to 50),
BAS - Bass (from -10 to 10),
TRE - Treble (from -10 to 10)
BAL - Balance (sound distribution between the right and left speakers)
(from 10L to 10R)
FAD - Fader (sound distribution between the rear and front speakers)
(from 10F to 10R)
Turn the multi controller to change the settings of the displayed menu items. ‹
additional settings via the SEL button or the multi controller
Hold the ‹ SEL button or the multi controller down for approx. 2 seconds then
subsequently press the SEL button or the multi controller repeatedly until the
desired function is shown in the display.
INVOL - switch on volume
Turn the multi controller to set the volume level, with which the device is to ‹
be set when turned on.
REC - Recording format
Turn the multi controller to set the record format for recording on SD/MMC ‹
and/or USB data carriers, MP3 (MP3 data) or WMA (Windows Media
Audio).
SUBW - Subwoofer
You can connect an active external subwoofer to produce a more powerful bass
eff ect.
Turn the multi controller to turn the bass eff ect on (SUBW ON) or off ‹
(SUBW OFF).
ADJ - Time of day
NOTICE
The device is equipped with an RDS controlled clock. The clock sets itself ►
automatically when the EON function is switched on and also continues to
run when the radio is switched off . If you do not receive any RDS signal you
can also set the time of day manually.
Turn the multi controller to the right to set the hours and to the left to set the ‹
minutes.