Handling and operation – Silvercrest KH 2377 User Manual
Page 33
31
Handling and operation
KH 2377
GB
IE
NOTICE
Do not mount the microphone in the vicinity of speakers otherwise the voice
►
quality may deteriorate.
Call accept/end
With an incoming call you hear the call signal via your mobile phone, whilst in
the device's display is shown the call number.
You accept an incoming call by pressing the
TALK button on the micro-
phone unit or the
button on the device and/or on the remote control.
You end the call by pressing the
TALK button again on the microphone unit
or the
button on the device and/or on the remote control.
Rejecting a call
With an incoming call press the
button on the device and/or on the
remote control to reject the call.
To call
Press the
button on the device and/or on the remote control.
DIAL appears in the display.
With the number buttons on the device and/or on the remote control enter
the telephone number that you want to call.
Press the
button again. The number is dialled and CALLING appears
in the display.
Redial
Hold down the
TALK button on the microphone unit or the
button on
the device and/or on the remote control for approx. 2 seconds.
If previously no call number was selected via the number buttons on the
–
device and/or the remote control the last selected mobile phone call
number is dialled.
If previously a call number was selected via the number buttons on the
–
device and/or the remote control this call number is dialled.