Silvercrest KH 2377 - Manual (Page 32)

30
Handling and operation
KH 2377
GB
IE
Press the ‹ SCAN/REC button several times to select either the copying option
COPY USB (copying on USB data carriers) or COPY MMC (copying on
SD/MMC cards).
Start the copy process by pressing the ‹ BAND/ENT button.
During the copy process COPY appears in the display and a percentage indicator
from 01 - 100 shows the copying progress. After the notice COPY 100 the
copying process is ended and playback of the MP3 title continues.
Connecting an external audio device to the device
Connect the audio output of an external audio device (i.e. an MP3 player) ‹
via a 3.5 mm stereo jackplug to the socket AUX IN on the front panel of
the device.
Select playback of the audio input by pressing, several times, the ‹ MODE
button until AUX is shown in the display.
Bluetooth operation
The microphone unit must be connected to the device in order to use the Bluetooth
functions. In addition a mobile phone is required that supports the Bluetooth data
transmission.
Connecting the telephone to the device
Activate the Bluetooth function on your mobile phone and conduct a search ‹
for Bluetooth devices.
After a successful search the entry CarBT appears for the device in the display
of the mobile phone.
Select this entry for the connection and for the subsequent password request ‹
enter the password 1234 for the device. You may possibly have to confi rm
the connection structure once more.
After a successful coupling CONN OK appears briefl y in the device's display
and the green LED on the microphone unit lights up.
Using the microphone
During the telephone call you will hear the caller via the speaker connected to
the device.
For optimal transmitting of your voice place the microphone unit close to you. ‹
Attach the microphone unit, for example, to the dashboard. For this purpose ‹
you can use the supplied sticky tape. In this case clean beforehand dust and
grease from the surface. The sticky tape can be used for securing on almost
all smooth surfaces.