Handling and operation – Silvercrest KH 2377 User Manual

Page 21

Advertising
background image

19

Handling and operation

KH 2377

GB

IE

TAVOL - Volume for traffi

c radio

Turn the multi controller to set the volume level, with which traffi c reports are

‹

to be played back.

EON - Information from other stations

When the EON function is switched on the radio switches to traffi c radio or PTY
groups if the TA or PTY function has been activated.

Turn the multi controller in order to switch the EON function on (EON ON)

‹

or off (EON OFF).

DSP - Equalizer (Digital Sound Processing)

Turn the multi controller to select one of the settings

‹

DSP CLASSIC, DSP

ROCK, DSP POP, DSP FLAT or DSP NONE. In the setting DSP NONE
no DSP is switched on. The DSP equalizer setting is shown at the bottom of
the display.

You can also set the equalizer by pressing the DSP button on the remote control.
With this setting DSP is switched off when the radio frequency is shown again.

TA - Traffi

c Announcement (traffi

c radio)

Turn the multi controller to perform the following settings:

‹

TA SEEK: As soon as the reception signal for traffi c announcements becomes
weaker or you leave the reception area the search function starts and will look
for the strongest TA station.

TA ALARM: As soon as the reception signal for traffi c announcements becomes
weaker or you leave the reception area an alarm tone sounds.

PI - Program Identifi cation (Sound with the station search)

Turn the multi controller to perform the following settings:

‹

PI SOUND: Station search with sound.

PI MUTE: Station search without sound.

RETUNE (Search times of stations with PI recognition)

Turn the multi controller to perform the following settings:

‹

RETUNE L: The search process for a station with the correct PI recognition runs
for 90 seconds.

RETUNE S: The search process for a station with the correct PI recognition runs
for 30 seconds.

MASK (Conceal specifi c stations)

Turn the multi controller to perform the following settings:

‹

MASK DPI: Conceals the AF stations which have another PI recognition.

MASK ALL: Conceals the AF stations which have another PI recognition and all
annoying non-PI stations that have the same station frequency.

Advertising
This manual is related to the following products: