System Sensor PDRP-1001 - Manual (Page 11)

Options 1. Product Description
PDRP-1001 Instruction Manual PN 50734:D0 04/06/01
11
Remote Annunciator - RZA-4X
The Remote Annunciator mounts on a standard single-gang box, and provides
LED indication of the same functions as the Zone Relay Module.
• Alarm/Alarm Pressure (red)
• Alarm Pressure/Aux Supervisory (red)
• Releasing Circuit 1 (red)
• Aux Supervisory/Releasing Circuit 2 (red)
• System Trouble LED (yellow)
A local trouble sounder and silence switch are also provided. All LED wiring
is supervised for open conditions. Any open condition will cause the System
Trouble LED to illuminate. Slide-in paper labels permit an easy change of
information.
Note: The Remote Annunciator requires the use of an LED Interface Module as described below.
LED Interface Module - 4XLM
The LED Interface Module supports the RZA-4X Remote Annunciator
Module. Annunciator wiring is supervised for open conditions by this module.
The module mounts to the main board on the J8 option connector.
Specifications
Maximum voltage/current, each output: 27.6 V / 8 mA.
Outputs are power-limited.
Meter Module (Volts-Amps) - 4XMM
The Meter Module provides a voltmeter to measure the voltage across the
batteries and an ammeter to measure the charging current to the batteries. The
meters are provided as an assembly that mounts to the lower left-hand corner
of the cabinet.
SYSTEM TROUBLE
RE-SOUND
TONE
SILENCE
FIRE ALARM ANNUNCIATOR
RXA
-4
X
F.
cd
r
TB
1
J2
4X
LMF
.cd
r
0
10 20
30
DC VOLTS
3
DC AMPERES
0
3
4XM
M
F.cdr