Symbol Technologies Spectrum24 AP-4131 - Manual (Page 123)

Configuring the AP
AP-4131 Access Point Product Reference Guide 113
2.8.1 Configuring the ACL
The ACL supports adding MU entries by individual MAC address or by a
range of MAC addresses.
1. Select the Set Access Control List option from the Main Menu to display:
Address Type? range individual
2. Use the UP/DOWN-ARROW keys to toggle between
range
and
individual
.
2.8.2 Range of MUs
To select a range of MAC addresses:
1. Type in the minimum MAC address as the top value:
00:0A:F8:F0:01:01
2. Press ENTER to accept the value; use the DOWN-ARROW key to select
the maximum value.
3. Type in the maximum MAC address in the bottom value:
00:0A:F8:F0:02:FF
4. Press ENTER to accept the value; use the DOWN-ARROW key to
select OK.
5. Press ENTER. The UI displays:
Symbol Access Point
Ranges of Allowed Mobile Units
Min Address Max Address
00:A0:F8:F0:01:01 00:A0:F8:F0:02:FF
00:A0:F8:29:10:02 00:A0:F8:29:11:00
Delete-[F1] Add-[F2] Save All APs-[F3] Exit-[ESC]
6. Verify values reflect the network environment. Change them as needed.