Symbol Technologies Spectrum24 AP-4131 - Manual (Page 68)

Configuring the AP
58 AP-4131 Access Point Product Reference Guide
5. In the Antenna Selection field, use the SPACE BAR or LEFT/RIGHT-
ARROW keys to toggle between
Full Diversity
,
Primary Only
,
Secondary
Only
, or
Rx Diversity
.
6. Select
OK
or
Save
to register settings by writing changes to NVM.
Selecting
Save
displays a confirmation prompt.
7. Select
Save ALL APs
or press
[F2]
to save the AP installation
configuration information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP on the
Known APs table to update their configuration and reset after the
configuration has been modified. Users can perform this option only
among the same hardware platforms and firmware version.
Additional
Gateways The IP address of the additional gateways used.
Access up to seven gateways.
DHCP/BOOTP Enables or Disables selection of DHCP/BOOTP.
The options are:
•
Enabled
– DHCP and BOOTP interoperate,
whichever response the AP selects first
becomes the server allocating the
information.
•
DHCP Only
– Only DHCP responses will be accepted
by the AP.
•
BOOTP Only
– Only BOOTP responses will be accepted
by the AP. If both DHCP and BOOTP
services are required, do not selected
BOOTP Only.
•
Disabled
– Disables BOOTP and DHCP; network
configuration is manually entered.