Symbol Technologies Spectrum24 AP-4131 - Manual (Page 60)

Configuring the AP
50 AP-4131 Access Point Product Reference Guide
Administration screens include options for saving or clearing data that
appear on the bottom line of the screen. Confirmation prompts include
the following:
2.2.1 Entering Admin Mode
The UI defaults to User when in Serial mode allowing read-only access to the
APs functions (e.g., view statistics). Entering Admin mode provides access to
configuration menus and allows the user to configure the AP.
Entering Admin mode requires the administration password.
1. Select
Enter Admin Mode
from the Main Menu. The AP prompts for the
administration password:
Enter System Password:
2. Type the default password:
Symbol
The password is case-sensitive.
OK Registers settings but does not save them in NVM
(nonvolatile memory). A reset command returns to
previously saved settings.
Save Saves all settings (including ones not on that screen) to
NVM. This is the same as Save Configuration in the Special
Functions screen.
Save ALL APs Saves the AP installation configuration information to all APs
with the same Net_ID (ESS)
.
This option saves the
configuration changes for the current AP on the Known APs
table to update their configuration and reset after the
configuration has been modified. Users can perform this
option only among the same hardware platforms and same
firmware versions.
Cancel Does not register settings changed in a screen.