Symbol Technologies Spectrum24 AP-4131 - Manual (Page 55)

Configuring the AP
AP-4131 Access Point Product Reference Guide 45
To access the AP UI using a Web browser from a workstation:
1. From the NCPA properties window set the IP address of the workstation
and the subnet mask. The system tells the user to reboot for property
changes to take effect.
The workstation, in this case, is the workstation or laptop computer running
the Web browser.
2. To verify the connection, ping the AP. At the default DOS prompt, type:
Ping -t xxx.xxx.xxx.xxx
– If the ping receives no response, verify that the hardware
connections, IP address, gateway address and subnet mask are
correct. If correct, contact the site System Administrator for
network assistance.
3. Start a Web browser such as Internet Explorer 4.0 or greater, or
Netscape 3.0 or greater.
Type the IP Address for the associated AP to access the AP using a
Web browser:
http://xxx.xxx.xxx.xxx