Symbol Technologies Spectrum24 AP-4131 - Manual (Page 141)

Configuring the AP
AP-4131 Access Point Product Reference Guide 131
Ensure the Filename is AP_CFG.TXT unless the user changed the Filename.
Verify the paths accuracy for the filename. See step one.
8. Enter the TFTP Server IP address or name in the TFTP Server field.
9. Press
F1
to save settings.
10. The Firmware Update Menu displays
A re You Sure? yes no
Type
Y
.
If using telnet to connect to the AP through an Ethernet interface, do not use
the
Use XMODEM to Update Access Point’s Firmware
option. This option causes the AP to
reset and look for the configuration file over the serial interface.
11. Under the function heading
Use TFTP to Update Access Point’s:
select
Config
.
12. Press ENTER.
13. The Firmware Update Menu displays
A re You Sure? yes no
Type
Y
.
The Telnet session ends when the user answers Y at the prompt.
The WIRED LAN ACTIVITY indicator on the AP does NOT flash.
To view the file transfer log, switch to the TFTP application.
The AP resets when the file transfer completes.
14. Telnet to the AP using its IP address.