Symbol Technologies Spectrum24 AP-4131 - Manual (Page 172)

Monitoring Statistics
162 AP-4131 Access Point Product Reference Guide
3. Press ESC to return to the previous menu.
Access Control Specifies if the access control feature is set to
one of three Access Control modes: Disabled,
Allowed, or Disallowed.
•
When Disabled (default) is selected, no
filtering is performed.
• When Allowed is selected, only MAC
addresses specified in the Access Control List
are allowed to associate with the AP.
• When Disallowed is selected, only MAC
addresses not specified in the Disallowed
Addresses List (Address Filtering) are allowed
to associate with the AP.
WLAP Mode Specifies if enabling the wireless AP operation
status. If enabled, the AP sets up automatically
for wireless operation. This feature is
Disabled
by default.
Model Number Identifies the model number.
Serial Number States the APs unique identifier.
Hardware Revision Specifies the hardware version.
AP Firmware Ver Specifies the firmware version.
RF Firmware Ver Specifies the Radio firmware version.
HTML File Ver Specifies the HTML file version.
Current MUs Specifies the current number of associated MUs.
Total Assoc Specifies the total MU associations handled by
this AP.
System Up Time Specifies how long the system has been
operational. System Up Time resets to zero after
59,652.32 hours (6.8 years).