Silvercrest CDV-710 User Manual
Page 17
17
Deutsch
English
Caution:
The device is distinguished by a high degree of output. During operation, this results in a
strong heat generation. Therefore no cables or other parts may adjoin the device. If their
insulation melts, there is the risk of a short circuit or fire.
Note:
The connection 8.3 shown in illustr. 8.3 with the symbol
has to be connected to the parking
brake or other suitable components of the vehicle in such a way that the video playback of the
device is interrupted for the driver while the vehicle is in motion. Please consider that your
insurance coverage may be restricted or exempted otherwise. Please consult a specialist in
your area if you have any questions about the connections.
8.2 Connecting the antenna
The device is designed for antennas with an impedance of 75 Ω. To connect the antenna, plug
the antenna cable into the antenna socket of the device (socket on the rear of the device).
8.3 Supply
voltage
ISO plug A:
A2 (orange):
Connection to the reverse light to switch on the rear view camera when the
reverse gear is put in.
A4 (yellow):
Connection for +12V operational voltage (diameter at least 2.5 mm²) to terminal #
30 (permanent plus) of the vehicle.