Silvercrest CDV-710 - Manual (Page 68)

68
Deutsch
English
Note:
If you have forgotten your changed password, you can set a new one at any time by entering
the factory default password 136900.
22.6 Exiting the settings
To exit the settings menu again, please navigate to the last item
in the bar on top. The menu item “exit menu” will appear. Press
the five-way multifunction button
once to exit the menu.
You can also exit the menu at any time by pressing the
SETUP button .
23 Factory default settings (“RESET“)
By using the reset function, the device can be changed back to the factory default settings.
To use the reset function, please press the button REL on the device. Now the operating unit
can be carefully detached towards the front and left. Now press the button on the device with
a thin, sharp object. The device will then be reset and turned off if required.
Note:
When the factory settings are restored, the clock and the stored radio stations will also be reset
or erased.