Silvercrest CDV-710 - Manual (Page 41)

41
Deutsch
English
When the monitor is open, the display will jump to the RDS submenu and switch the function on
or off. If there is no entry for approx. ten seconds, the device returns to the radio display and
store the changes that were made.
Note:
• If the selected station is not a traffic broadcast station, the device automatically starts to
scan for the next traffic broadcast station.
• If “TP” is turned on, the CD/DVD, SD-MMC, USB and AUX IN operation is interrupted for a
traffic announcement and will be continued afterwards. For the duration of the traffic alert,
"TP” will appear on the display. During AUX IN operation, the current track will not stop but
continue playing. To stop the device connected via AUX IN, please consult the manual of
the respective manufacturer of the device.
• If you only want to hear traffic announcements, turn on the announcement function with the
“TP” button and turn the volume to “VOL 0” with the volume control dial or use the MUTE
function. The device will automatically regulate a volume increase for traffic
announcements.
• The TA volume can be individually adjusted under the volume item “TA VOL”.
14.13 Alternative frequencies (“AF“)
To activate the “AF” function, briefly press the “AF/REG” button . The message “AF” appears
and the function is turned on.
To turn off the “AF” function, briefly press the “AF/REG” button . The message “AF”
disappears and the function is deactivated.