Sony DSR-85 - Manual (Page 18)

Location and Function of Parts
Chapter 1 Overview
18
Chapter 1 Overview
CH-1
AUDIO IN 600 Ω
OFF ON
0dBm
-8dBm +4dBm
CH-2
600 Ω
0dBm
-8dBm +4dBm
CH-3
600 Ω
0dBm
-8dBm +4dBm
CH-4
600 Ω
0dBm
-8dBm +4dBm
AUDIO OUT
CH-1 CH-2 CH-3 CH-4
OFF ON OFF ON OFF ON
Y
R-Y
B-Y
ANALOG I/O
REF.VIDEO
IN
75 Ω
ON
OFF
OUT
IN
OUT
TIME CODE
VIDEO IN
75 Ω
ON
OFF
VIDEO OUT
1
2
(SUPER)
OUT IN
MONITOR
AUDIO OUT IN
S VIDEO
COMPONENT VIDEO
4
Analog audio signal input/output section
1 AUDIO IN 600 Ω
ON/OFF switches
Use these switches to select either 600
Ω
impedance
(the ON setting) or 10-k
Ω
impedance (the OFF setting)
for the AUDIO IN CH-1 to CH-4 connectors.
2 AUDIO IN –6 dBm/0 dBm/+4 dBm switches
Set these switches according to the levels of the signals
input to the AUDIO IN CH-1 to CH-4 connectors.
3 AUDIO IN CH-1 (channel 1) to CH-4 connectors
(XLR 3-pin, female)
Use these connectors to connect separate channels of
audio input from a player VCR or other external audio
equipment.
4 AUDIO OUT CH-1 (channel 1) to CH-4
connectors (XLR 3-pin, male)
Output channel-1 to channel-4 audio signals,
respectively.
5 MONITOR AUDIO connector (RCA phono
jack)
Outputs audio signals for monitoring. The audio
signals to be output from this connector can be
selected with the MONITOR SELECT switches on the
front panel. (See 4 menu control panel on page 13.)
5 MONITOR AUDIO connector
4 AUDIO OUT CH-1 to CH-4 connectors
3 AUDIO IN CH-1 to CH-4 connectors
2 AUDIO IN –6 dBm/0 dBm/+4 dBm
switches
1 AUDIO IN 600
Ω
ON/OFF switches