Sony DSR-85 - Manual (Page 66)

66
Chapter 5 Connections and Settings
Chapter 5
Connections and Settings
Adjusting the Sync and Subcarrier Phases
When using two or more players, as in an A/B roll
editing system, phase synchronization of the signals
(i.e. system sync) is necessary and for composite
signals, the subcarrier phase must also be in sync. If
not, picture instabilities or color break-up may occur at
edit points. After configuring the editing system, use a vectorscope
to adjust the sync and subcarrier phase of the recorder
and players. Subcarrier phase adjustment is necessary
when using composite signals.
DSR-60/60P (player 1)
UVW-1600/1600P (player 2)
Switcher (DFS-500/
500P
a) , etc.)
PGM OUT BLACK
BURST
OUT
75
Ω
coaxial cable (B)
75
Ω
coaxial cable (A)
A IN
B IN
REF. VIDEO
EXT IN
Vectorscope (Sony
Tektronix 1750/1751, etc.)
a) The sync and subcarrier phase of the output signal from the
DFS-500/500P switcher are automatically adjusted.
Editing controller (PVE-500)
Note
Ensure that the 75
Ω
coaxial cables (A) and (B) are of the same
length.
Adjusting the Sync and Subcarrier Phases
DSR-85/85P (recorder)
) 0 6 r p
) 0 6 p