Sony DSR-85 - Manual (Page 28)

Playback
Chapter 2 Recording and Playback
28
Chapter 2 Recording and Playback
This section describes the necessary settings and operations to perform
playback on this unit. The same settings and operations apply whether you
are using the unit as part of an editing system, for dubbing, or as a stand-
alone videocassette player. For the necessary connections for playback
and the settings not covered in this section, see Chapter 5 “Connections
and Settings”.
Settings for Playback
1
Power on this unit by pressing on the “1” side of the POWER switch.
2
Power on the video monitor and set the monitor’s switches as shown
below.
Playback
) 0 6 r p
1
2
Player (DSR-85/85P)
Video monitor
Switch Setting
75
Ω
termination switch ON (or attach a 75
Ω
terminator)
Input switch Set according to the type of input signal from this unit.