Sony DSR-85 - Manual (Page 44)

44
Chapter 4 Menu Settings
Chapter 4
Menu Settings
Menu Contents
Menu contents (Continued)
DISPLAY CONTROL [Display]: Settings related to
indications on the monitor and the unit Description of settings
∗
TIME DATA & STATUS [>> Time&STA]: Time data and
operating mode indications
TIME DATA & UB [>> Time&UB]: Time data selected using
the COUNTER SELECT button, and user bit data. (When
user bit data is selected using the COUNTER SELECT
button, user bit data and time code are output.)
TIME DATA & CNT [>> Time&CNT]: Time data selected
using the COUNTER SELECT button, and CNT value.
(When CNT is selected using the COUNTER SELECT
button, CNT value and time code are output.)
TIME DATA ONLY [>> Time]: Only time data
REC DATE & TIME [>> REC Date]: The time data selected
with the COUNTER SELECT button is shown on the time
counter display, and the date and time of recording are
shown on the monitor screen.
DISPLAY INFO [> DISP info]: Select information
superimposed on output from the VIDEO OUT 2 (SUPER)
connector to the monitor.
CHARA. TYPE [> Chara type]: Set the type of characters in
text superimposed on output from the VIDEO OUT 2
(SUPER) connector to the monitor.
Make the following settings while watching the monitor
screen.
∗
WHITE (WITH BKGD) [>> White]: White characters on black
background
BLACK (WITH BKGD) [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Press the MENU button to confirm the setting and return to
the level 1 of the setup menu.
SUB STATUS [> Sub status]: Select supplementary status
information superimposed on output from the VIDEO OUT
2 (SUPER) connector to the monitor
(page 53).
∗
OFF [>> OFF]: Nothing of supplementary status information.
EDIT PRESET [>> Edit Pre]: Indications of the editing mode
settings made from the connected editing controller.
PB FORMAT [>> Format]: Indication of the recording format
which was used for the tape being played back.
TC MODE [>> TC mode]: Indications of the operating mode
of internal time code generator.
ALL [>> ALL]: All of the above-mentioned items of
supplementary status information.
For details of supplementary status information displayed on
the monitor when a setting other than “OFF” is selected, see
“Displaying of Supplementary Status Information” (page 55).
Make the following settings while watching the monitor
screen.
∗
WHITE [WITH BKGD] [>> White]: White characters on black
background
BLACK [WITH BKGD] [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Press the MENU button to confirm the setting and return to
the level 1 of the setup menu.
MENU DISPLAY [> Menu DISP]: Set the type of characters in
menu text superimposed on output from the VIDEO OUT 2
(SUPER) connector to the monitor.
PEAK HOLD [> Peak hold]: Set the peak hold time for audio
level meter.
1.5 SEC [>> 1.5 SEC] to
∗
OFF [>> OFF]: Set the time from
zero (OFF) to 1.5 seconds in steps of 0.1 second.
(Continued)