Sony DSR-85 - Manual (Page 65)

Chapter 5 Connections and Settings
65
Chapter 5
Connections and Settings
The following shows connections for a system in
which analog playback signals from another recorder
or player are recorded on a DSR-85/85P. In this
system, the video signals are analog component signals
and the audio signals are recorded from audio channels
1 and 2.
Settings on the DSR-85/85P
Connections for Analog Recording
2 75
Ω
coaxial cable (not supplied)
1 Cable with RCA phono plugs
(not supplied)
a) Three 75
Ω
coaxial cables are used one each for Y, R–Y, and B–Y.
Video monitor
Composite
video input Audio input
DSR-60/60P (player)
75 Ω termination
switch: ON
Switch/input/audio mode Setting
REMOTE/LOCAL REMOTE (when controlling
the unit from an editing
controller)
AUDIO IN 600
Ω
ON/OFF ON
AUDIO IN –6 dBm/0 dBm/
+4 dBm Normally +4 dBm
DSR-85/85P
(recorder)
For details of the video/audio input and audio mode
settings, see “Settings for Recording” (page 19).
3 Cable with XLR connectors (not
supplied)
Video input Component
Audio input Analog
Audio mode 2-channel (48 kHz)
VIDEO
OUT
2(SUPER)
REF.VIDEO
OUT
MONITOR
AUDIO
COMPONENT VIDEO
Y, R–Y, B–Y/RGB OUT
COMPONENT
VIDEO IN
(Y, R–Y, B–Y)
a)
REF. VIDEO IN
AUDIO OUT
CH-1 CH-2
AUDIO IN
CH-1 CH-2
1 2
2
2
3
3
REMOTE
AC IN
ANALOG I/O
REF.VIDEO VIDEO OUT
MONITOR AUDIO
S VIDEO OUT
AUDIO OUT
QSDI
COMPONENT VIDEO
TBC REMOTE
SDI OUTPUT
TIME CODE OUT