Sony 4-130-033-13(1) - Manual (Page 14)

14 US
You can install your speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
2
Fasten the screws to the wall.
The screws should protrude
7/32 to 9/32 inch.
For the center speaker
For the front speakers
For the surround speakers
3
Hang the speakers on the
screws.
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
• If you install the speakers on the wall, you do not
need to attach the supplied speaker stand.
Installing the speakers on the
wall
4 mm (3/16 inch)
more than 25 mm (more than 1 inch)
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
Hook on the back of the speaker
5 mm to 7 mm
(7/32 to 9/32 inch)
160 mm
(6 3/8 inches)
5 mm to 7 mm
(7/32 to 9/32 inch)
217 mm
(8 5/8 inches)
5 mm to 7 mm
(7/32 to 9/32 inch)
100 mm
(4 inches)
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
Rear of speaker