Sony 4-130-033-13(1) - Manual (Page 54)

54 US
To insert the wireless
transmitter into the S-AIR main
unit
1
Remove the screws and detach the slot
cover.
Notes
•Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
•The slot cover is no longer necessary. However,
keep it after detaching.
2 Insert the wireless transmitter.
Notes
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the V
marks are aligned.
• Insert the wireless transmitter EZW-T100 only
into the wireless transceiver slot.
3 Use the screws that you removed from
step 1 to secure the wireless
transmitter.
Note
Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless
transceiver into the surround amplifier and
S-AIR receiver, refer to the operating
instructions supplied with the surround
amplifier and S-AIR receiver.
AUTO
CAL MIC
DMPORT
DC5V 700mA MAX
AUDIO IN
VIDEO 1
L
R
EZW-T100
EZW
-T10
0
Slot cover
EZW
-T10
0
Wireless transmitter
EZW-T100 slot
EZW
-T100