Sony 4-130-033-13(1) - Manual (Page 56)

56 US
x Before pairing
Sound transmission is established by the ID
(example).
x After pairing
Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.
1
Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
Note
Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
• To set the ID of the S-AIR main unit,
see “To set the ID of the S-AIR main
unit” (page 55).
• To set the ID of the S-AIR sub unit,
refer to the operating instructions
supplied with the S-AIR sub unit.
3
Press AMP MENU.
4
Press V/v repeatedly to select
“S-AIR”.
5
Press or b to enter the
menu.
6
Press V/v repeatedly to select
“PAIRING”.
7
Press or b to enter the
parameter.
8
Press V/v repeatedly to select
the setting you want, then
press .
• START: The S-AIR main unit starts
pairing.
• CONDIN: you can check the current ID.
When the pairing setting is timed out,
“NO PAIR” appears in the display.
9
Start pairing of the S-AIR sub
unit.
x For the surround amplifier
Refer to the operating instructions
supplied with the surround amplifier.
x For the S-AIR receiver
Refer to the operating instructions
supplied with the S-AIR receiver.
10
Pairing completed.
“COMPLETE” appears in the display.
To exit the menu
Press AMP MENU.
ID A
ID A
ID A
ACTIVE STANDBY
INPUT SELECTOR MASTER VOLUME ? / 1
Your room
S-AIR main unit
S-AIR sub unit S-AIR sub unit
Neighbor
ID A
ID A
ID A
ACTIVE STANDBY
INPUT SELECTOR
MASTER VOLUME
? / 1
Your room
S-AIR main unit
S-AIR sub unit S-AIR sub unit
Neighbor
No transmission
Pairing