Sony 4-130-033-13(1) - Manual (Page 55)

55 US
Ot
her
Oper
at
ions
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR products by setting a different ID for
each unit.
To set the ID of the S-AIR main
unit
1
Press AMP MENU.
2
Press V/v repeatedly to select
“S-AIR”.
3
Press or b to enter the
menu.
4
Press V/v repeatedly to select
“S-AIR ID”.
5
Press or b to enter the
parameter.
6
Press V/v repeatedly to select
the desired ID (A, B or C) then
press .
To exit the menu
Press AMP MENU.
To set the ID of the S-AIR sub
unit
For details on setting the ID of the surround
amplifier and S-AIR receiver, refer to
operating instructions supplied with the
surround amplifier and S-AIR receiver.
Sound transmission is established as
follows (example):
To establish sound transmission, you need to
set the same ID for your S-AIR main unit and
S-AIR sub unit. However, if your neighbors
have S-AIR products and their IDs are the
same as yours, your neighbors could receive
the sound of your S-AIR main unit or vice
versa.
To prevent this, you can pair the S-AIR main
unit with a specific S-AIR sub unit by
performing the pairing operation.
Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
4 6
7 8
0 ENTER
9
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET + REPLAY ADVANCE
AMP MENU
CLEAR
DISPLAY MUTING
MASTER VOL
TV VOL
SOUND
FIELD
. < < >
5
TOOLS/
OPTIONS
MENU/HOME
GUIDE
AMP
MENU
,
V/v/b
Pairing the S-AIR main unit with
a specific S-AIR sub unit
(Pairing operation)
ID A ID A ID B
ID A ID B
ACTIVE STANDBY
INPUT SELECTOR
MASTER VOLUME
? / 1
S-AIR main unit
Other S-AIR
main unit
S-AIR
sub unit S-AIR
sub unit S-AIR sub unit
continued