Sony 4-130-033-13(1) - Manual (Page 24)

24 US
1
Press AMP MENU.
2
Press V/v repeatedly to select
“A.CAL”.
3
Press or b to enter the
menu.
“START” appears on the display.
4
Press to start the
measurement.
Measurement starts in 5 seconds.
While the time is counting down, stand
away from the measurement area to avoid
measurement error.
The measurement process will take
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
Notes
• If “PHONES” appears, you cannot perform the
Auto Calibration. Disconnect the headphones
from the S-AIR product you are using, then restart
the Auto Calibration.
• If “CHK MIC” appears, you cannot perform the
Auto Calibration. Connect the calibration mic,
then restart the Auto Calibration.
Tips
• When Auto Calibration starts:
– Stand some distance from the speakers and the
listening position to avoid measurement failure.
This is because test signals are output from the
speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
• The Auto Calibration function will be canceled
when you do the following during the
measurement process:
– Press ?/1 or MUTING.
– Press input buttons on the remote or INPUT
SELECTOR on the receiver.
– Change the volume level.
Performing Auto Calibration
1 2 3
4 6
7 8
0 ENTER
9
SYSTEM STANDBY
TV INPUT DMPORT
VIDEO1 VIDEO2 BD DVD
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET + REPLAY ADVANCE
F1 MENU TOP MENU F2
AMP MENU
CLEAR
DISPLAY MUTING
MASTER VOL
TV VOL
GUIDE
SOUND
FIELD
FAVORITES WIDE PICTURE JUMP
THEATER
SA-CD/CD TV TUNER
?/1
. < < >
5
TV ?/1
AV ?/1
TOOLS/
OPTIONS
MENU/HOME
SAT
BD/DVD
Input
buttons
?/1
switch
MASTER
VOL +/–
AMP
MENU
MUTING
,
V,v,B,b
Measurement for Display
Speaker existance TONE
Speaker gain, distance,
frequency response T.S.P.
Subwoofer gain and distance WOOFER