Sony 4-130-033-13(1) User Manual
Page 59
59
US
Ot
her
Oper
at
ions
To exit the menu
Press AMP MENU.
Notes
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set “RF CHNG”.
• In most cases, you will not need to change this
setting.
• If “RF CHNG” is set to “RF OFF,” transmission
between the S-AIR main unit and S-AIR sub unit
can be performed using one of the following
channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
(For EZW-T100A wireless transceiver
only)
1
Press AMP MENU.
2
Press
V/v repeatedly to select
“S-AIR”.
3
Press
or
b to enter the
menu.
4
Press
V/v repeatedly until “RF
POWER” appears in the front
panel display, then press
or
b.
5
Press
V/v repeatedly to select
the desired setting.
• “HIGH”: Normally select this.
• “LOW”: The RF output power is
decreased.
6
Press .
The setting is made.
7
Press AMP MENU.
The receiver menu turns off.
(For the S-AIR receiver only (not
supplied))
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
“STBY” to “STBY ON”.
1
Press AMP MENU.
2
Press
V/v repeatedly to select
“S-AIR”.
3
Press
or
b to enter the
menu.
4
Press
V/v repeatedly to select
“STBY”.
5
Press
or
b to enter the
parameter.
6
Press
V/v repeatedly to select
the setting you want, then
press .
• STBY OFF: You cannot enjoy the
S-AIR receiver while the S-AIR main
unit is in standby mode.
• STBY ON: You can enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode or turned on.
Changing the RF output power
Enjoying the S-AIR receiver
while the S-AIR main unit is in
standby mode
4
6
7
8
0
ENTER
9
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
REPLAY ADVANCE
AMP MENU
CLEAR
DISPLAY
MUTING
MASTER VOL
TV VOL
SOUND
FIELD
.
<
<
>
5
TOOLS/
OPTIONS
MENU/HOME
GUIDE
AMP
MENU
,
V,v,B,b
continued