3more transmission functions, Auto fax reception power-up, Dual access – Savin F ax Machine 1018 User Manual

Page 114: Transmission with image rotation, Checking the transmission result

Advertising
background image

More Transmission Functions

31

3

More Transmission Functions

Auto Fax Reception Power-up

This machine can be set to shut down
automatically if nobody has used it
for a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the Main Power
switch is on.

Important

❒ Reception is not possible if both

the operation switch and Main
Power

switch are turned off.

Note

❒ By default, messages are printed as

soon as they are received (Immedi-
ate Reception). To change this, see
P.72 “User Parameters” (Switch14,
Bit0).

Dual Access

The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory , or automat-
ically printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission terminates, the line
will be used efficiently.
Note that during Immediate Trans-
mission or when in User Tools mode,
the machine cannot scan an original.

Transmission with Image
Rotation

For most purposes, set A4/LT origi-
nals in the landscape direction (

L). If

you set an A4/LT original in the por-
trait direction (

K), the image will be

sent rotated by 90

°. Providing the re-

ceiver has A4/LT landscape paper
(

L), the message will be printed the

same size as the original.

Limitation

❒ This feature is not available with

Immediate Transmission.

Checking the Transmission
Result

• Turn the Communication Result

Report on if you want a report to
be printed after every successful
transmission. See P.34 “Printed Re-
port”
.
If you leave the Communication
Result Report off, the report will
not be printed after every trans-
mission. However, should a trans-
mission fail, a Communication
Failure Report will be printed in-
stead.

• If you turn the Transmission Re-

sult Report (Immediate Transmis-
sion) off, the Error Report will be
printed when the communication
on fails.

• You can also check the transmis-

sion result by examining the Jour-
nal. See P.21 “Printing the Journal”.
You can either print or scroll
through the Journal on the display.
See P.17 “Checking the Transmission
Result (TX File Status)”
.

Advertising