Savin F ax Machine 1018 - Manual (Page 47)

37
3. Setup
Own Name/Fax Header/Own Fax Number
Make sure that all necessary settings
are made before connecting your ma-
chine to the telephone line.
❖ ❖ ❖ ❖ Own Name
This should be your name or com-
pany name, in 20 characters or less.
During communication, if the oth-
er party's fax machine supports
Own Name, this replaces the Own
Fax Number that follows. This
name will appear on the display of
the other party's Fax machine, and
the name registered on that ma-
chine will appear on yours.
Limitation
❒ The registered name will not be
used unless the other party has
a same machine of the same
make that supports the Own
Name feature.
❖ ❖ ❖ ❖ Fax Header
This is ordinarily the telephone
number of the line your machine is
connected to. Your fax header can
be up to 32 characters long, and is
printed on the header of every
page you send.
❖ ❖ ❖ ❖ Own Fax Number (Required by inter-
national law)
This is your fax machine's phone
number, which must include coun-
try and area codes, in 20 characters
or less. During any communica-
tion, your Own Fax Number ap-
pears on their display. (Conversely
their Own Fax Number appears on
your display.)
Note
❒ In some areas, the Own Fax
Number is preprogrammed by
your service representative, and
cannot be re-programmed by
the user.
Important
❒ When sending a fax, your Own Fax
Number is required by interna-
tional law. You cannot legally con-
nect a fax machine to the telephone
system if the Own Fax Number is
not programmed.
Note
❒ You can confirm the Own Name,
Fax Header, and Own Fax Number
settings in the User Parameters
List. See Chapter 6 ”Printing the
User Parameter List” in the Ad-
vanced Features manual.