Savin F ax Machine 1018 - Manual (Page 33)

Canceling a Memory Transmission
23
2
Canceling a Transmission
While the Message is Being
Sent
Use this procedure to cancel a trans-
mission after the original has been
scanned.
Limitation
❒ If transmission finishes while you
are carrying out this procedure, it
will not be canceled.
Note
❒ If you cancel a message while it is
being sent, transmission is halted
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
B
Press the
{{{{Job Information}}}} key,
and confirm that "1. Cancel TX /
RX" is displayed.
The Information menu is shown.
C
Press the
{{{{OK }}}} key.
D
Press the
0 0 0 0 or 1 1 1 1 key until the file
you wish to delete is shown and
press the
{{{{OK}}}} key.
E
Press
0 0 0 0 or 1 1 1 1 to select "Yes" and
press the
{{{{OK}}}} key.
The file is erased, and the machine
will return to standby mode.